D48KA
Slip-on lens hood (48 mm) for Minolta Minolta lenses with 48 mm barrel
Original part (OEM)
Not checked yet
PorkForge replacement
Not made yet
Part facts
- Original part number
- D48KAR1
- Manufacturer
- Minolta
- System
- Body and sheet metal
- Material
- metalR1
- Notes
- Metal slip-on hood held by a thumb screw, for 48 mm Minolta lenses. The maker stopped making this system long ago (inferred); OEM availability was not checked.
- Last reviewed
- Oct 28, 2026 · record pf-cam-00026
Dimensions How to measure this part
| Dimension | Value | Evidence |
|---|---|---|
| Diameter | 2.24 in 57 mm · dealer listing gives overall size as A x B (x C) mm and weight; which axis is diameter or depth is our reading | Reported 1 |
| Depth | 0.75 in 19 mm · dealer listing gives overall size as A x B (x C) mm and weight; which axis is diameter or depth is our reading | Reported 1 |
| Weight | 0.051 lb 23 g · dealer listing gives overall size as A x B (x C) mm and weight; which axis is diameter or depth is our reading | Reported 1 |
Fits these machines
| Model | Years | Notes | Evidence |
|---|---|---|---|
| Minolta Minolta lenses with 48 mm barrel | Not recorded | models not listed | Reported 1 |
Where to find one today
| Source | Condition | Price | Stock | Checked |
|---|---|---|---|---|
| Kamerastore (used camera dealer, Finland) 1 | Used | — | Out of stock | Oct 28, 2026 |
Why it is hard to get
- Market evidence: Out of stock at a large used-camera dealer on 28 Oct 2026; the item is only available used. 1
Can this part be made again?
EligiblePhysical replacement
Lens hood or cap: not structural, hot, electrical or safety-critical. The bayonet or clip features need accurate geometry.
Candidate materials: PETG, ASA (confirmed by test-fitting).
EligibleSTL / FreeCAD file
Can be offered as a printable file and an editable FreeCAD model once the measurements are verified.
Sources
Not affiliated with or endorsed by Minolta or its successors. The name is used only to identify compatibility. Part numbers are shown for reference. Check fit against your own machine. Spot a mistake?
Verification checklist (2 of 8 met)
- ✕ OEM part number not yet verified from an OEM or dealer source
- ✕ Cited by one website only, and not an OEM or dealer source
- ✓ At least one compatible model with a source
- ✕ 2 kinds of fact beyond the name (dimensions, material); 3 needed
- ✕ Original availability not yet checked
- ✓ Text and title are distinct
- ✕ On hold: Sourced from Kamerastore; its terms for automated use are not yet checked
- ✕ Not yet reviewed and signed off for search
Related parts
| Part no. | Part | Make | Fits | Original | PorkForge | Sources |
|---|---|---|---|---|---|---|
| 70234433 | Instrument panel trim (D15, D17, D19) | Allis-Chalmers | D15, D17, D19 | Not checked | Research only | 2 |
| BS-52 | Lens hood | Canon | FD 50mm f, 1.4, 1.8 | Not checked | Research only | 1 |
| BS-55 | Lens hood | Canon | FD 50mm f, 1.4 S.S.C., 1.8 S.C. | Not checked | Research only | 1 |
| BS-58 | Lens hood | Canon | FD 55mm f, 1.2 S.S.C., FD 50-135mm | Not checked | Research only | 1 |
| BT-52 | Telephoto lens hood | Canon | FD 85mm f, 1.8, FD 100mm f, 2, 2.8 +1 more | Not checked | Research only | 1 |
| BT-55 | Telephoto lens hood | Canon | FD 85mm f, 1.8, FD 100mm f, 2.8, FD 135mm f +1 more | Not checked | Research only | 1 |
| BW-52B | Wide-angle lens hood | Canon | FD 28mm f, 2.8, 2 | Not checked | Research only | 1 |
| BW-55A | Wide-angle lens hood | Canon | FD 35mm f, 2 S.S.C., 3.5 S.C. | Not checked | Research only | 1 |