12501
Square lens hood (12501M) for Leica Super-Angulon 21mm f, 3.4, Elmarit 28mm f and 2.8
Original part (OEM)
Not checked yet
PorkForge replacement
Not made yet
Part facts
Dimensions How to measure this part
| Dimension | Value | Evidence |
|---|---|---|
| Width | 2.56 in 65 mm · dealer listing gives overall size as A x B (x C) mm and weight; which axis is diameter or depth is our reading | Reported 1 |
| Height | 2.32 in 59 mm · dealer listing gives overall size as A x B (x C) mm and weight; which axis is diameter or depth is our reading | Reported 1 |
| Depth | 0.75 in 19 mm · dealer listing gives overall size as A x B (x C) mm and weight; which axis is diameter or depth is our reading | Reported 1 |
| Weight | 0.064 lb 29 g · dealer listing gives overall size as A x B (x C) mm and weight; which axis is diameter or depth is our reading | Reported 1 |
Fits these machines
| Model | Years | Notes | Evidence |
|---|---|---|---|
| Leica Super-Angulon 21mm f | Not recorded | — | Reported 1 |
| Leica 3.4 | Not recorded | — | Reported 1 |
| Leica Elmarit 28mm f | Not recorded | I | Reported 1 |
| Leica 2.8 | Not recorded | I | Reported 1 |
Where to find one today
| Source | Condition | Price | Stock | Checked |
|---|---|---|---|---|
| Kamerastore (used camera dealer, Finland) 1 | Used | €185.00 (about $206.28) | In stock | Oct 28, 2026 |
Why it is hard to get
Can this part be made again?
EligiblePhysical replacement
Lens hood or cap: not structural, hot, electrical or safety-critical. The bayonet or clip features need accurate geometry.
Candidate materials: PETG, ASA (confirmed by test-fitting).
EligibleSTL / FreeCAD file
Can be offered as a printable file and an editable FreeCAD model once the measurements are verified.
Sources
Not affiliated with or endorsed by Leica or its successors. The name is used only to identify compatibility. Part numbers are shown for reference. Check fit against your own machine. Spot a mistake?
Verification checklist (2 of 8 met)
- ✕ OEM part number not yet verified from an OEM or dealer source
- ✕ Cited by one website only, and not an OEM or dealer source
- ✓ At least one compatible model with a source
- ✕ 2 kinds of fact beyond the name (dimensions, aftermarket prices); 3 needed
- ✕ Original availability not yet checked
- ✓ Text and title are distinct
- ✕ On hold: Sourced from Kamerastore; its terms for automated use are not yet checked
- ✕ Not yet reviewed and signed off for search
Related parts
| Part no. | Part | Make | Fits | Original | PorkForge | Sources |
|---|---|---|---|---|---|---|
| 12509 | Lens hood | Leica | Elmarit-R 28mm f, 2.8, Summicron-R 35mm f, 2, Elmarit-R 35mm f +2 more | Not checked | Research only | 1 |
| 70234433 | Instrument panel trim (D15, D17, D19) | Allis-Chalmers | D15, D17, D19 | Not checked | Research only | 2 |
| BS-52 | Lens hood | Canon | FD 50mm f, 1.4, 1.8 | Not checked | Research only | 1 |
| BS-55 | Lens hood | Canon | FD 50mm f, 1.4 S.S.C., 1.8 S.C. | Not checked | Research only | 1 |
| BS-58 | Lens hood | Canon | FD 55mm f, 1.2 S.S.C., FD 50-135mm | Not checked | Research only | 1 |
| BT-52 | Telephoto lens hood | Canon | FD 85mm f, 1.8, FD 100mm f, 2, 2.8 +1 more | Not checked | Research only | 1 |
| BT-55 | Telephoto lens hood | Canon | FD 85mm f, 1.8, FD 100mm f, 2.8, FD 135mm f +1 more | Not checked | Research only | 1 |
| BW-52B | Wide-angle lens hood | Canon | FD 28mm f, 2.8, 2 | Not checked | Research only | 1 |