K121584
End bumper clip for Kreepy Krauly (Pentair) Kreepy Krauly original, serial 91B3920 and lower
Original part (OEM)
No longer available
PorkForge replacement
Not made yet
Part facts
- Original part number
- K121584R1
- Manufacturer
- Kreepy Krauly (Pentair)
- Part type
- Brackets, clips and hardware
- System
- Body and sheet metal
- Notes
- Clip that held the end bumper on the original Kreepy Krauly. The dealer listing says it is no longer available and points to the complete roller bumper kit 3240-1400 (maker number K121400) at about $88 instead.
- Last reviewed
- Oct 28, 2026 · record pf-pool-00003
Dimensions How to measure this part
Fits these machines
| Model | Years | Notes | Evidence |
|---|---|---|---|
| Kreepy Krauly (Pentair) Kreepy Krauly original, serial 91B3920 | Not recorded | — | Reported 1 |
| Kreepy Krauly (Pentair) lower | Not recorded | — | Reported 1 |
Where to find one today
Why it is hard to get
- No longer available: No longer available; owners are sent to a roller bumper kit priced near $88. 1
Can this part be made again?
EligiblePhysical replacement
Small clip; not structural or hot. A cheap clip versus an $88 kit is a good reproduction case.
Candidate materials: PETG, Nylon (confirmed by test-fitting).
EligibleSTL / FreeCAD file
Can be offered as a printable file and an editable FreeCAD model once the measurements are verified.
Sources
Not affiliated with or endorsed by Kreepy Krauly (Pentair) or its successors. The name is used only to identify compatibility. Part numbers are shown for reference. Check fit against your own machine. Spot a mistake?
Verification checklist (5 of 8 met)
- ✕ OEM part number not yet verified from an OEM or dealer source
- ✓ Cited by two websites, or by an OEM or dealer source
- ✓ At least one compatible model with a source
- ✕ 1 kinds of fact beyond the name (original availability); 3 needed
- ✓ Original availability checked 2026-10-28
- ✓ Text and title are distinct
- ✓ No editorial hold
- ✕ Not yet reviewed and signed off for search
Related parts
| Part no. | Part | Make | Fits | Original | PorkForge | Sources |
|---|---|---|---|---|---|---|
| K12077 | Extension ring | Kreepy Krauly (Pentair) | Kreepy Krauly original, serial 91B3920, lower | No longer available | Research only | 1 |
| K12344 | Swivel cone | Kreepy Krauly (Pentair) | Kreepy Krauly original, serial 91B3920, lower | No longer available | Research only | 1 |
| K12680 | Float pivot arm pin (kit) | Kreepy Krauly (Pentair) | Kreepy Krauly original, serial 91B3920, lower | No longer available | Research only | 1 |