AT13741
Clutch housing button plug (cover) for John Deere 1010 and 2010
Original part (OEM)
Not checked yet
PorkForge replacement
Not made yet
Part facts
- Original part number
- AT13741✓2
- Manufacturer
- John Deere
- Part type
- Caps, plugs and grommets
- System
- Body and sheet metal
- Notes
- Cover that plugs an opening in the clutch housing of John Deere 1010 tractors from serial 42001 and the 2010, per one reseller. Deere's store lists AT13741 as a cover, about 4 inches tall in its product data, with no substitute, but shows no stock and no dealer listing was found. A reseller example at $25.00 was sold out.
- Last reviewed
- Oct 27, 2026 · record pf-jd-0013
Dimensions How to measure this part
| Dimension | Value | Evidence |
|---|---|---|
| Height | 4 in 102 mm · Listed in product details on the OEM store; not measured by PorkForge; may be a packed size | Reported 2 |
| Length | 0.7 in 18 mm · Listed in product details on the OEM store; not measured by PorkForge; may be a packed size | Reported 2 |
| Weight | 0.31 lb 141 g · Listed in product details on the OEM store; not measured by PorkForge; may be a packed size | Reported 2 |
Fits these machines
| Model | Years | Notes | Evidence |
|---|---|---|---|
| John Deere 1010 | Not recorded | — | Reported 1 |
| John Deere 2010 | Not recorded | — | Reported 1 |
Where to find one today
Why it is hard to get
- Market evidence: Listed at $25.00 (described as not cracked, bent or broken) and sold out on 2026-10-27. 1
Can this part be made again?
EligiblePhysical replacement
Non-structural cover plug. Check whether it sees oil or clutch heat before choosing PETG.
Candidate materials: PETG (confirmed by test-fitting).
EligibleSTL / FreeCAD file
Can be offered as a printable file and an editable FreeCAD model once the measurements are verified.
Sources
- Vintage John Deere Parts: AT13741 clutch housing button plug
- shop.deere.com product page for AT13741
Not affiliated with or endorsed by John Deere or its successors. The name is used only to identify compatibility. Part numbers are shown for reference. Check fit against your own machine. Spot a mistake?
Verification checklist (5 of 8 met)
- ✓ OEM part number verified from a cited source
- ✓ Cited by two websites, or by an OEM or dealer source
- ✓ At least one compatible model with a source
- ✕ 1 kinds of fact beyond the name (dimensions); 3 needed
- ✕ Original availability not yet checked
- ✓ Text and title are distinct
- ✓ No editorial hold
- ✕ Not yet reviewed and signed off for search
Related parts
| Part no. | Part | Make | Fits | Original | PorkForge | Sources |
|---|---|---|---|---|---|---|
| AR28552 replaced by AT48674 | Indicator lamp lens (oil pressure warning) | John Deere | 1010, 2010, 2510, 3010, 4010 +20 more | Not checked | Research only | 3 |
| R26673 replaced by AL155227 | Steering wheel cap (early New Generation) | John Deere | 1010, 2010, 3010, 4010, 5010 | Available | Research only | 5 |
| R28792 replaced by AR33479 | Dash lamp lens | John Deere | 1010, 2010, 3010, 4010, 5010 +5 more | Assembly only | Research only | 3 |
| T19345 | Steering wheel cap (1010, 2010) | John Deere | 1010, 2010 | Not checked | Research only | 2 |
| AF2914R | Fuel tank cap | John Deere | 50, 60, 70, 520, 620 +41 more | Not checked | Not eligible | 2 |
| M4338T | Gear shift knob (5-speed) | John Deere | 420, 430, 435, 1010 | Not checked | Research only | 2 |
| R27829 | Selective control lever knob (early New Generation) | John Deere | 2010, 2020, 2510, 3010, 4010 +4 more | Not checked | Research only | 2 |
| R28164 | Rockshaft and selective control lever knob | John Deere | 2010, 2510, 3010, 3020, 4010 +3 more | Not checked | Research only | 2 |