70228924
Tool box (WC, WD, WD45, WF, D10 to D17) for Allis-Chalmers WC, WD, WD45, WF and 5 more
Original part (OEM)
Not checked yet
PorkForge replacement
Not made yet
Part facts
- Original part number
- 70228924R1
- Manufacturer
- Allis-Chalmers
- Part type
- Tool boxes and trays · Tool boxes and lids
- System
- Body and sheet metal
- Notes
- Tool box listed for the Allis-Chalmers WC, WD, WD45 and WF and the D10 to D17. The same salvage group sells a new reproduction (supplied primed, marked made in USA, and noted as possibly needing sanding and filler before paint) at about $56, and a used box at $40. No size was published. Cheap steel reproductions already exist, so a whole box is a weak PorkForge target; lids, latches or hinges would be better if owners report them missing.
- Last reviewed
- Oct 27, 2026 · record pf-ac-0003
Dimensions How to measure this part
Fits these machines
| Model | Years | Notes | Evidence |
|---|---|---|---|
| Allis-Chalmers WC | Not recorded | — | Reported 1 |
| Allis-Chalmers WD | Not recorded | — | Reported 1 |
| Allis-Chalmers WD45 | Not recorded | — | Reported 1 |
| Allis-Chalmers WF | Not recorded | — | Reported 1 |
| Allis-Chalmers D10 | Not recorded | — | Reported 1 |
| Allis-Chalmers D12 | Not recorded | — | Reported 1 |
| Allis-Chalmers D14 | Not recorded | — | Reported 1 |
| Allis-Chalmers D15 | Not recorded | — | Reported 1 |
| Allis-Chalmers D17 | Not recorded | — | Reported 1 |
Where to find one today
Can this part be made again?
EligiblePhysical replacement
Storage box: not structural or safety-critical. Size not published; a full tractor tool box is likely longer than 205 mm (the D15 to D19 box is 21-3/8 in), so it would need a split design or another fabricator. Steel reproductions already compete.
Candidate materials: PETG, sheet steel (other fabricator) (confirmed by test-fitting).
EligibleSTL / FreeCAD file
Can be offered as a printable file and an editable FreeCAD model once the measurements are verified.
Sources
- Tool Box fits Allis Chalmers D10 D12 D14 D15 WC WD WD45 WF D17 70228924
- Allis Chalmers D17 Sheet Metal & Body Parts (All States Ag Parts category page)
Not affiliated with or endorsed by Allis-Chalmers or its successors. The name is used only to identify compatibility. Part numbers are shown for reference. Check fit against your own machine. Spot a mistake?
Verification checklist (3 of 8 met)
- ✕ OEM part number not yet verified from an OEM or dealer source
- ✕ Cited by one website only, and not an OEM or dealer source
- ✓ At least one compatible model with a source
- ✕ 1 kinds of fact beyond the name (aftermarket prices); 3 needed
- ✕ Original availability not yet checked
- ✓ Text and title are distinct
- ✓ No editorial hold
- ✕ Not yet reviewed and signed off for search
Related parts
| Part no. | Part | Make | Fits | Original | PorkForge | Sources |
|---|---|---|---|---|---|---|
| 70220901 | Lever knob | Allis-Chalmers | CA, D10, D12, D14, D15 +10 more | Not checked | Research only | 2 |
| 70242323 | Tool box, long style (D15 to D19, 160 to 220 series) | Allis-Chalmers | D15, D17, D19, 160, 170 +7 more | Not checked | Research only | 2 |
| 70210907 | Battery box lid (CA, WD, WD45, D10, D12) | Allis-Chalmers | B, C, CA, D10, D12 +3 more | Not checked | Research only | 2 |
| 1132039R1 | Cab tool tray, 86 and 88 series cabs (dealer accessory) | International Harvester | 86 series, 88 series, 986 | Not checked | Research only | 1 |
| 1132040R1 | Cab tool tray, 66 and 68 series cabs (dealer accessory) | International Harvester | 66 series, 68 series | No longer available | Research only | 1 |
| AB4518R | Tool box | John Deere | 50, 520, 530 | Not checked | Research only | 2 |
| 850436M1 | Toolbox (without cover) | Massey-Harris | Pony, Pacer | Not checked | Research only | 2 |
| 1K805 | Tool box cover (lid), Fleetline and Super series | Oliver | Super 66, Super 77, Super 88, 66, 77 +4 more | Not checked | Research only | 2 |